Series CA10 Each switch body is supplied with the appropriate legend plate but the switch operator must be ordered separately (see stock no. 350-0840 typically) Rated at 20A S0 size (48x48mm) Technical Specification Series CA10 CA20 CA25 CAD11 CHR10 CG8 Insulation Voltage U, 690V 690V 690V 600 690 690 Thermal Current l th 20A 25A 32A 6A 20A 20A Motor Rating AC-23A 7.5kW 11kW 15kW - 7.5kW 7.5kW Motor Rating AC-3 5.5kW 7.5kW 11kW - 5.5kW 5.5kW Switching Angle 60° Dims. (mm) 48 x 48mm Ambient temp. of stages 55°C during 24 hours with peaks up to 60°C at 100% load Protection IP20 Legend Plate Silver with black text Standards IEC 947, EN 60947 CA10, CA20, CA25 & CAD11 Series Open finger proof terminals accessible from the side to facilitate wiring. Captive plus-minus screws CHR10 Series For connection with ring type terminals. Open finger-proof terminals accessible while switch is being installed. Captive plus-minus screws located 90° apart from the terminal direction allowing for connection of wires without any interference with the terminal screws. CG8 Series Open finger-proof terminals accessible while the switch is installed. Captive plus-minus screws. Due to the arrangement of the terminals it is possible to install switches closely, side by side or to mount them directly at the cable trays

Optional Padlockable Handles For use where a MAIN SWITCH is specified Features silver faceplate and black Handle 4 hole fixing IP65 ingress protection Padlockable (x4) in "OFF" position Separate versions for enclosed polycarbonate cam switches, or open (panel) extended cam switches Kraus & Naimer All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply.

IP65, Panel Door Mount, Switch Disconnectors Padlockable (x4) in "OFF" position Fingerproof main terminals on 20A to 63A switches Terminal shrouds supplied with 80A to 250A switches Note Switch types KG80 and KG100 come with terminal shrouding for the main contact terminals on one side of the switch body only (stock nos. 282-1411 , 193-6017 , 282-1607 & 282-1613 ). The KG161 and KG251 switches (stock nos. 282-1629 & 282-1635 ) include shrouding for both sides of the switch. Standards BS EN 60947-3, EN60947-3, IEC 60947-3, VDE 0660, EN 60204-1 Kraus & Naimer All have a nominal voltage of 690V. The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply.